Aslan M20 Pro BLDC Slotless Motor
Custom Configurations are available based on Customer Requirements & Official Quote from Aslan.
- NDAA compliant
Manufactured in Radford, Virginia
Support after the sale
Support after the sale
Direct access to the engineers who designed and built your components, plus responsive warranty, RMA, and replacement support. We stay with you long after delivery.
Specifications
| Rated voltage | 24 VDC |
|---|---|
| Continuous power | 75 W |
| Continuous torque | 0.353 N·m · 50 oz·in |
| Speed at rated torque | 2,000 rpm |
| No load speed | 2,700 rpm |
| Continuous current | 5.0 A |
| No load current | 0.2 A |
| Torque constant (Kt) | 0.0854 N·m/A · 12.10 oz·in/A |
| Back EMF (Kb) | 6.35 Vrms/krpm |
| Motor constant (Km) | 0.0741 N·m/√W · 10.50 oz·in/√W |
| Resistance (L-L) | 1.30 Ω |
| Inductance (L-L) | 0.50 mH |
| Housing | Machined aluminum, integral radial cooling fins |
| Mounting | Four arm base with through holes, plus threaded bosses on the housing |
| Bearings | Shielded precision ball bearings, front and rear |
| Output shaft | Threaded, with flat |
| Connection | Flying lead harness, multi pin connector |
| Rating condition | Continuous ratings on a 254 × 254 × 6.4 mm aluminum plate |
Downloads
Description
A 75 W brushless DC slotless motor in a machined aluminum heatsink housing, built for the cooling, pumping, and actuation work that keeps a platform running.
Built for the work around the platform rather than on the propeller: moving air through electronics bays, driving coolant and fuel pumps, and turning geared positioners. The machined aluminum housing carries integral cooling fins and a four arm mounting base, and the continuous rating is published against a defined heatsink condition, not an ideal bench.
